Facilities and equipment

Workshops

Size and lifting

Interior of Workshop 1 with an overhead crane and steel plates — **Workshop 1**
92 m × 23 m × 12 m • 2,116 m² • 10 t × 2 cranes

Interior of Workshop 2 with fabrication in progress — **Workshop 2**
126 m × 38 m × 12 m • 4,788 m² • 10 t × 4 + 5 t × 2 cranes

Interior of Workshop 3 with rolled shells and an overhead crane — **Workshop 3**
172 m × 38 m × 25 m • 6,536 m² • 16 t × 4 + 80 t × 2 cranes

Exterior of the BMH painting workshop — **Painting workshop**
Indoor blasting room: 660 m²
Two painting rooms: total 1,320 m²
Humidity-controlled paint-shop environment

Maximum individual overhead-crane rating: 80 t. Also: hydraulic jack 200 t, chain hoists up to 10 t, pipe rotators 30 t.

Equipment

Main equipment by process

From the BMH equipment register, September 2026.

Process	Equipment	Capacity
Cutting	CNC fibre laser 30 kW	Bed 26 × 3.5 m, up to 50 mm
Cutting	CNC fibre laser 6 kW	Bed 12 × 2.4 m, up to 18 mm
Cutting	CNC plasma and flame	Bed 20 × 4 m, plasma 25 mm, flame 240 mm
Cutting	CNC multi-torch flame	Bed 20 × 4 m, up to 240 mm
Cutting	CNC pipe profile cutting	Pipe up to 630 mm dia., 12,000 mm long
Sawing	Band saws	Section up to 700 × 400 mm
Edge preparation	Edge rounding machine	R2 edge radius for coating
Forming	NC hydraulic press brake	300 t, bending length 6,000 mm
Forming	Plate rolling machine	Plate up to 40 mm thick, 6,000 mm wide
Machining	Conventional lathe	1,180 mm between centres
Machining	Vertical milling, radial drilling, portable milling	Portable milling travel 1,200 × 300 × 80 mm
Welding	Submerged arc, MIG/MAG (CO2) and TIG welding	Automatic and semi-automatic processes
Welding	Stud welding, arc air gouging, welding carriages	–
Welding	Pipe welding rotators	30 t per set
Surface	Indoor shot blasting line, blasting room	Room 660 m², Sa 3 as specified
Surface	Humidity-controlled paint rooms (2)	1,320 m² combined, airless spray 73:1

Processing limits depend on material grade, dimensions and project requirements. Availability is reviewed for each enquiry.

Machinery

Representative machines

Photographs of representative machines. Capacities are as in the equipment table above.

CNC multi-torch flame cutting, up to 240 mm.

CNC pipe profile cutting, pipe up to 630 mm diameter.

NC hydraulic press brake, 300 t, 6,000 mm.

Plate rolling machine, plate up to 40 mm thick.

Double-column CNC milling machine, travel 7,600 × 3,200 mm.

Large conventional lathe, turning diameter up to 1,100 mm.

Large portable flange facing machine, OD up to 7,500 mm.

Delivery

Waterfront access for heavy and oversized delivery

Item	Detail
Jetty	Approx. 400 m long, draft approx. 5.5 m
On-site crane capacity at the jetty	50 MT
Heavy lifts	Floating cranes and specialized lifting equipment are mobilized per project
Reference	Dolphin buoy loaded out at the BMH jetty for delivery to Australia
Routes	By barge, typically about 18 km, to the assembly and load-out area, or by road, about 50 km, to Hai Phong deep-water port

Dolphin buoy lifted by floating crane at the BMH jetty

Dolphin buoy, 110 MT. Shown as an example of our capability to fabricate oversized, heavy structures.

Permanent on-site capacity and project-mobilized heavy-lift resources are stated separately. The route is selected according to cargo dimensions and weight.

Three workshops in Hai Phong

Size and lifting

Main equipment by process

Representative machines

Waterfront access for heavy and oversized delivery